|
|
Site Last Updated
Medium
Range Remote Digital Control System
16 Channels RECEIVER
2 Miles of Line-of-Sight range Up to 10 Miles with
Long Range Antenna
Over 64,000 Codes, Indoor use enclosure, Power On and RF Activity
Indicators
Wiring Diagram
937016
|
SPECIFICATIONS
Operating Voltage: 12 to 15.o VDC
Operating Temperature: -4° to
+140° F (-20° to +60° C)
Receiver Type: Digital Superheterodyne
Sensitivity: -118 dB (minimum)
Selectivity: 6 KHz
Carrier
Frequency: 27,255 MHz
Number of Codes: 65,536
Code Setting
Method: DIP switch programming
Data Input: Alarm, restore,
status, and low battery
Antenna Impedance: 50 Ohms
Quarter Wave Optional
Dimensions: 7.9 in L x
1.25 in W x 6.5 in H (201 x 32 x 165 mm)
Weight: 1.5 lb. (0.680
Kg)
Current Drain: 300 mA (max) @ 12 VDC,
typical standby 65 mA alarm @ 12 VDC
Outputs: Alarm - form "C"
relay per channel Status exception - one open collector output
per receiver;
Low Battery - one open collector output per receiver (Audio
and signal strength test points)
16 outputs
are all low current (100mA at
12VDC) Optional
Power Relay
Latch Relay
Select Transmitter:
1 Ch
Transmitter
4 Ch Transmitter
Optional Long Range Antenna
4Ch Handheld
transmitter |
|
