voltage and current converter rescaler

Voltage and Current Converter/Rescaler will convert voltage signals in the range of 1-19V or current signals in the range of 1.33-76 mA into a 4-20 mA non-isolated signal. This current source signal can be direct or reverse acting and can be used to drive grounded 4-20 mA loads utilizing a single power supply. Also accepts an input from a resistive potentiometer. The unit is a single-input, single-output device

FEATURES
Converts voltage, current or potentiometer signal into 4-20 mA signal Direct or reverse acting 6 or 10 VDC output reference voltage available to power input device Loss of input signal results in zero mA output LED indication of valid input signal Dual output model available Outputs independently configurable

SPECIFICATIONS
	Power supply	22-27 VDC @ 50 mA (10V ref. voltage output); 15-27 VDC
		@ 50 mA (6V ref. voltage output)
	Input ranges	1-19 VDC, 1 V min span,
		301 kohm input impedance
		150 kohm input impedance
		4-76 mA, 4 mA min span,
		250ohm input impedance
		2-38 mA, 2 mA min span,
		500ohm input impedance
		1.33-25 mA, 1.33 mA min span,
		750ohm input impedance
	Input signal loss
	threshold	0.7 VDC
	Output range	4-20 mA
	Output load	850ohm max 24 VDC; Rmax = Vsupply- 7 / 20 mA
	Reference voltage output	10 VDC 15 mA max (1-19 VDC input); 6 VDC 10 mA max (1-11 VDC input)
	Linearity	1.0% of span
	Operating temp	32° to 158°F (0° to 70°C)
	Humidity limit	5% to 95% non condensing
	Mounting	Snap-track 1/2" hub, panel, or DIN rail mount enclosures
	Terminations	Snap-track mount: screw terminals;
	Weight	2 oz. (69 g)
	Dimensions	2.25" W x 1.75" H x 0.8"D (5.72 x 4.45 x 2.22 cm)

Made in USA